Sealant Abris Ms-Ltpe

The sealant in the form of a self-adhesive tape, which on the one hand is coated with an anti-adhesive material, on the other is reinforced with polyethylene. Application area: pipe insulation of household objects with increased requirements for cleanliness of premises and equipment. Color: according to customer request. Form of production: roll. Sealant Abris Ms-Ltpe is used for pipe insulation of household and drinking purposes of construction objects with increased requirements for cleanliness of premises and equipment. Material The sealant in the form of a self-adhesive tape, which on the one hand is covered with an anti-adhesive material, on the other is reinforced with polyethylene. Main geometrical dimensions: width (mm) × thickness (mm) (50 ÷ 220) x2 Drawing temperature not lower than -10 ° С Operating temperature from -60 ° С to + 140 ° С Water absorption,%, 24h, not more than 0.30 Bonding strength with metal during peeling, N / m, not less than 150 Bonding strength with concrete at separation, MPa, not less than 0.1 Flow resistance at 70 ° С, 24 h, mm, not more than 2.0 Store in original packaging in a dry place, avoid direct sunlight. Shelf life - 12 months. Mode of application: The main stages of the work: Before applying the sealant, the working surface must be prepared - dried, cleaned of dirt, dust, ice. Remove peeling outer rust and corrosion from the rusty surface. The Abris Ms-Ltpe brand tape must be removed with release paper and applied to the work surface with a sealing side, pressed in any mechanical way through a reinforcement coating. This should ensure that the sealant is tight, without gaps, against the surface. Sealing works are not recommended to be carried out at an ambient temperature below -20 ° C, in rain or snow. When working with a sealant does not require special protective equipment for workers.